Radiant Heat & Wood Flooring: Part 2

A strange phenomenon occurring in radiant heat floors is color change directly over the tubes, typically happening with oily woods (often exotics). Over time, the difference in heat exposure directly over the tubes, compared to the rest of the floor, causes a color change in the warmer areas, usually darker, and reveals the exact pattern of the tubes. This is damage to your flooring that cannot be sanded out of the floor.

Before the wood flooring arrives at your job site, the radiant heat system must be running. How long depends on the moisture conditions necessary to bring the wood flooring inside. Some say 2 weeks, others say 30 days minimum. Turning the system on will ensure it is functioning properly, there are no leaks, and it is driving moisture out. If it is not turned on, and the subfloor sufficiently dried before the wood flooring is installed, it is a virtual certainty that when winter arrives, and the system is turned on for the first time, the wood flooring will cup and buckle as the moisture is driven out of the subfloor and into the wood flooring.

Once the flooring has been installed and it is time to apply the finish, it is important that prior to the finishing, the radiant heat is turned off long enough to allow time for the floor surface to reach a normal temperature, usually a minimum of 6 hours. If not, the entire floor will act like one big “hot spot”, similar to any spot where sunlight is directly hitting the floor. This will cause the finish to dry too fast, leaving applicator marks and causing bubbles. Once the finish is dry, the radiant heat can be turned back on.

Lastly, what happens after the installation is just as important as before and during. The environment must be maintained at optimal levels. Stabilizing humidity is the key. Whether that means adding moisture in winter or drier months or dehumidifying in summer or warmer months – this is critical to the success of the floor. Speak with you contractor to understand what the optimal environment is for your floor. Understand that even with humidity controls, it’s natural for wood floors to shrink and swell. It is also important that after being turned off for the season, the radiant heat is gradually turned back on. By its nature, radiant heat warms up slowly and it will be hard to resist the urge to turn it up higher and faster. This will cause a drastic temperature change for the floors and potentially irreversible damage. There are safeguards available to ensure this does not happen. Outdoor thermostats automatically and gradually turn radiant heat up or down in response to outdoor temperature changes. You should be educated by you contractor or installer as to how the heat works and why it shouldn’t be turned up too much at once. Finally, controls can be included in the system that prevent anyone from turning up the system too much at any one time.

For more helpful information on hardwood flooring options, or to buy the right flooring for your radiant system, please visit www.GateWoodFloors.com.

Welcome to the World of Hardwood Flooring!

Thanks for visiting the GateWood Floors Blog! We are thrilled to introduce ourselves and share lots of great information with you. Check back often for all kinds of useful content about hardwood floors:

You’ll learn how to plan a hardwood floor purchase, from pro’s and con’s of flooring types and guidance for decision-making to how to install and take care of your new floor.

We’ll also share hardwood floor industry information and updates, such as the latest production techniques and hot trends from manufacturers. Of course, we’ll always keep you in-the-know about brand new products, as well.

Lastly, don’t forget to check our blog for sales and special promotions – you’ll find the best deals on our hardwood flooring mentioned here.

Sharing our experience and knowledge with you in our blog is just the first step – visit GateWoodFloors.com to shop from wide variety of wood species in a range of widths, finishes and grades to suit any taste and lifestyle.